For china earphone logo removing solution of 6500 port just make a jumper from Battery (+)

<

China Earphone logo Removing Solution 100% Working (6500 Port)

For china earphone logo removing solution of 6500 port just make a jumper from Battery (+) to Earphone plug in pin of Earphone/Charging connector as like as the picture shown bellow.If there is on any other problem;it will work 100% granted.For N95 port Earphone Logo Solution see this post and for V2port earphone solution show this post For V3 port see this post


  
Note:Earphone/Headphone plug in pin may be different for different mobile.Such as,For Symphony B10i it is pin no.2 from left side of headphone/charging connector;For octenn T11 it is pin no.5 from right side of earphone/headphone connector.So to solve this problem you have to check every pin of headphone connector one by one.Remember that during checking time you have to power on your phone through DC Power Supply instant off Battery.If you power on your phone with battery during this time ,your may be damaged.So be careful about this.