Sunday, 5 October 2014

QMobile A120 Fully Dead Solution by Chinese Miracle II [MTK module] v 1.00

<

Before Write Flash another China Tool but Phone Full Dead.
but Sorry i miss screen short and logs



Here is Logs Read and Write.

Quote:
Chinese Miracle II [MTK module] v 1.00

Operation : Read Flash [ v1.00 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 30 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Processing DA stage
NAND_ID : 00000000000000000000
eMMC_ID : 90014A4834473164048601A3F0884113
DA Stat : v4.2 on BBID : 0x88
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : d1G4
[eMMC] : FLASH_CID : 134188F0A301860464314734484A0190
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Read Ok , collect info
Brand : QMobile
ProdName : A120
ProdModel : QMobile A120
Device : A120
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1
Saved to : C:\Users\ALAZIZ\Desktop\QMOBILE A120\MT6572__QMOBILE__QMobile_A120__ALPS.JB3.MP.V1 __Android_4.2.2__20140410_103138.ispff

Done!
Elapsed: 00:14:02
Reconnect Power/Cable!


Load File
File_Info : s4031a
FileVersion : MT6572
Load File Ok

Operation : Flash [ v1.00 ]

======= Flash
Files set for flashing :
[ MCU ] : MT6572__QMOBILE__QMobile_A120__ALPS.JB3.MP.V1__And roid_4.2.2__20140410_103138.ispff

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 30 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Processing DA stage
NAND_ID : 00000000000000000000
eMMC_ID : 90014A4834473164048601A3FD364107
DA Stat : v4.2 on BBID : 0x88
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : d1G4
[eMMC] : FLASH_CID : 074136FDA301860464314734484A0190
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Brand : QMobile
ProdName : A120
ProdModel : QMobile A120
Device : A120
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1

Flash pre-erase disabled

Write Flash now ...
[ MCU ] : MT6572__QMOBILE__QMobile_A120__ALPS.JB3.MP.V1__And roid_4.2.2__20140410_103138.ispff

Init Ok , Sending blocks ...
Write done , 3696 blocks sent

Done!
Elapsed: 00:09:18
Reconnect Power/Cable!

Screen Shot



Regard
FullFlashPak

Sohidul Bokul

0 comments:

Post a Comment

recoment

Google+ Followers

 

Copyright @ 2013 Full And Final Solution.

Designed by Templateify & Sponsored By Twigplay