Friday, 22 August 2014

NOTE3, N9005 FW 4.4.2KK, IMEI REPAIRED and "3G/4G" WORK

<

To connect SM-N9005 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM6
Selected model: SM-N9005
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM11
Mode: Normal
Phone model: SM-N9005
Firmware compiled date: Dec 19 2013
Firmware compiled time: 11:00:00
Firmware released date: Mar 4 2014
Firmware released time: 14:17:12
Incorrect IMEI
SW version: M8974A-AAAANAZM-1.0.180102
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM11
Selected model: SM-N9005
Mode: Normal
Phone model: SM-N9005
Firmware compiled date: Dec 19 2013
Firmware compiled time: 11:00:00
Firmware released date: Mar 4 2014
Firmware released time: 14:17:12
SW version: M8974A-AAAANAZM-1.0.180102
Old IMEI: 004400-15-202000-0
New IMEI: 357507-05-XXXXXX-6
Creating NVM backup
Reading NVM done!
Connecting to ADB, please waite...
Firmware compiled date: Mon Apr 14 17:38:48 KST 2014
PDA version: N9005XXUEND3
CSC version: N9005ITVEND1
SW version: N9005XXUENC2
Phone IMEI: Unknown
Phone SN: RF1DXXXXXXY
Android version: 4.4.2 (KOT49H)
Cheking Root
Erasing old IMEI. It can take some time. Please wait...
Reading security backup, please wait...
Backup saved as E:\Programmi\Octoplus\Octoplus_Samsung\BACKUP\Secu rity-SM-N9005-21-08-2014_09-49-37-.asec file
Phone will restart now. Please don't disconnect cable!
After phone being rebooted and powered on perform the following steps:
1. Disconnect USB cable.
2. Wait for 1-2 minutes.
3. Connect phone via UART cable to the Box.
Serching phone...
Phone found.
Writing new IMEI. Please wait...
Please connect phone to USB cable and press OK button.
Serching phone...
Firmware compiled date: Dec 19 2013
Firmware compiled time: 11:00:00
Firmware released date: Mar 4 2014
Firmware released time: 14:17:12
SW version: M8974A-AAAANAZM-1.0.180102
Found phone on COM11
Repairing NVM for SM-N9005 phone...
Repairing 3G/4G...
3G/4G repair successfully

IMEI successfully repaired.
To finish the operation, please restart the phone via phone's menu (don't disconnect the battery!)

Sohidul Bokul

0 comments:

Post a Comment

recoment

Google+ Followers

 

Copyright @ 2013 Full And Final Solution.

Designed by Templateify & Sponsored By Twigplay