Samsung G900 Official Firmware,Download

<

Samsung G900 Official Firmware, Samsung G900 Firmware

1. Check battery percentage, charge your device to a decent level of at least 60% battery power. Your device should not turn off during installation.
2. Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
3. Backup important data and settings to external storage- follow this guide
4. Install USB driver for your device on your computer- Download Samsung USB Driver

1. Download Android 4.4.2 KTU1ANE8 Firmware for Galaxy S5 G900K from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy S5 G900K into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy S5 G900K to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with .tar.md5 extension (The firmware file look something like: G900KXXDLJ5_G900KODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish