- Download Android 4.4.2 ZNU1ANF1 Firmware for Galaxy S5 G9009
- Download Odin 3.09
- InstallUSB driverfor your device on your computer-Download Samsung USB Driver
- Switch off your phone and boot Galaxy S5 G9009 intoDownload Modeby pressing and holding theVolume Down+Home+Powerbuttons (long press until the boot screen appear), now pressVolume Upkey to proceed toDownload Mode.
- Extract the downloadedOdin3.09zip file and run theOdin3 v3.09.exefileas an administrator(Right click on the .exe file and click on Run as administrator)
- Now connect yourGalaxy S5 G9009 to your computer via USB cable
- In Odin3 screen, you should see a COM Port number like“0:[COM7]”at ID:COM section and“Added!”text at the message box. This means your device has been detected by Odin3.
- Make sure that, only the“Auto Reboot”and“F. Reset Time”options are checked.
- Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
- In Odin screen, click onAP (PDA in older Odin)button and select the firmware file with.tar.md5 extension(The firmware file look something like: G9006VXXDLJ5_G9006VODDDLI7_INU.tar.md5)
- Now, click on theStartbutton to begin the installation process, wait few moments.
- Once completed, you would see“PASS!”message in ID:COM port having green background
- Your phone should automatically reboot after completion
- You can now disconnect your phone from computer
- Finish
Congratulations! yourGalaxy S5 G9006Vis now updated to the latest and officialAndroid 4.4.2 KitKat firmware.
Hope you successfully done the update process. If you followed
everything as mentioned in the above tutorial, then your your Galaxy S5
should now running on the latestAndroid 4.4.2 KitKat build version G9009
. You can confirm the firmware update details fromSettings-About Phone. If you find any problem with the above tutorial and download link, feel free to contact with us using the comment form below..
.
0 comments:
Post a Comment